Description

A short-circuit was detected at flexible output FLEXO-HI-0 of the gear range selector

It may be overloaded.

The current may be max. 0.5 A.

Effects on the driving operation

The flexible output FLEXO-HI-0 is non-functional.

Possible causes

Short-circuit to ground at flexible output

Overload. (current load of the output greater than 0.5A).

An external voltage acts on the flexible output.

Connection of flexible output FLEXO-H1

Connector pin assignment of CAN gear selector switch

Pin	Name	Pin	Name	Pin	Name
1	IGN	6	CAN-H	11	FLEXI-4
2	-BATT	7	CAN-R	12	FLEXI-5
3	CAN-L	8	FLEXI-1	13	FLEXI-6
4	CAN-L	9	FLEXI-2	14	FLEXO-1H
5	CAN-H	10	FLEXI-3

Place of action

No description available.

Troubleshooting

Check cabling at flexible output FLEXO-HI-0 for short-circuit or external voltage.

Measure the load current: The current load of the output must be smaller than 0.5A.

Setting conditions of the event

No description available.

Test conditions of the event

No description available.

Final function check

If the defective component cannot be clearly identified, you should try to reproduce the fault:

• Reinstall the component in the vehicle.
• Test the function.

After the fault has been eliminated, the following steps have to be carried out:

• Conduct a test drive with function check.
• Read out the fault memory.
• Check the transmission for leaks.
• Perform a final visual inspection.

These steps are necessary to ensure the entire vehicle functions.

See also:

		Aftersales service index