Description

Requested braking torque faulty.

Effects on the driving operation

No retarder function through CAN signal.

Possible causes

The value for the requested brake torque is faulty.

The source causing the fault can be found in the system description

Place of action

No description available.

Instruction

Check the CAN-message and contact the manufacturer of the transmitting control unit if necessary.

(With SAE J1939: TSC1(Torque/ Speed Controller #1), 'override control mode' ;TSC1(Torque/ Speed Controller #1), 'requested torque' ).

Setting conditions of the event

No description available.

Testing conditions of the event

No description available.

Final function check

If the defective component cannot be clearly identified, you should try to reproduce the fault:

• Reinstall the component in the vehicle.
• Test function.

After the fault has been eliminated, the following steps have to be carried out:

• Conduct a test drive with function check.
• Read the fault memory
• Check transmission for leaks.
• Perform a final visual inspection.

These steps are necessary to ensure the entire vehicle functions correctly.